PREVIOUS QUESTION:

 

NEXT QUESTION:

 

How do you take your blood pressure?

ANSWER

If you purchase a manual or digital blood pressure monitor, follow the instruction booklet carefully. The following steps provide an overview of how to take your blood pressure using either a manual or digital blood pressure monitor:

1. Locate your pulse by lightly pressing your index and middle fingers slightly to the inside center of the bend of the elbow. Here, you can feel the pulse of the brachial artery. If you cannot locate a pulse, place the head of the stethoscope (on a manual monitor) or the arm cuff (on a digital monitor) in the same general area. 2. Thread the cuff end through the metal loop and slide the cuff onto your arm, making sure that the stethoscope head is over the artery. (When using a manual monitor, the cuff may be marked with an arrow to show the location of the stethoscope head.) The lower edge of the cuff should be about 1 inch above the bend of your elbow. Use the Velcro wrap to make the cuff snug, but not too tight.

3. Place the stethoscope in your ears. Tilt the earpiece slightly forward to get the best sound.

4. Inflate and deflate the cuff. If you are using a manual monitor, hold the pressure gauge in your left hand and the bulb in your right. Close the airflow valve on the bulb by turning the screw clockwise. Inflate the cuff by squeezing the bulb with your right hand. You may hear your pulse in the stethoscope. Watch the gauge. Keep inflating the cuff until the gauge reads about 30 points (mm Hg) above your expected systolic pressure. At this point, you should not hear your pulse in the stethoscope. Keeping your eyes on the gauge, slowly release the pressure in the cuff by opening the airflow valve counter clockwise. The gauge should fall only two to three points with each heartbeat. Listen carefully for the first pulse beat. As soon as you hear it, note the reading on the gauge. This reading is your systolic pressure. Continue to slowly deflate the cuff and listen carefully until the sound disappears. As soon as you can no longer hear your pulse beat, note the reading on the gauge. This reading is your diastolic pressure. Allow the cuff to completely deflate.

If you released the pressure too quickly or could not hear your pulse, do not inflate the cuff right away. Wait one minute before repeating the measurement. Start by reapplying the cuff. If you are using a digital monitor, hold the bulb in your right hand and press the power button. All display symbols should appear briefly, followed by a zero. This indicates that the monitor is ready. Inflate the cuff by squeezing the bulb with your right hand. If you have a monitor with automatic cuff inflation, press the start button. Watch the gauge. Keep inflating the cuff until the gauge reads about 30 points (mm Hg) above your expected systolic pressure. Sit quietly and watch the monitor. Pressure readings will be displayed on the screen. For some devices, values may appear on the left, then on the right. Most devices will also display your pulse rate. Wait for a long beep. This means that the measurement is complete. Note the pressures on the display screen. Systolic pressure appears on the left and diastolic pressure on the right. Your pulse rate may also be displayed in between or after this reading. Allow the cuff to deflate. Record the date, time, and systolic and diastolic pressures.

From: Checking Your Blood Pressure WebMD Medical Reference

SOURCE:

American Heart Association. 

Reviewed by James Beckerman on September 05, 2016

SOURCE:

American Heart Association. 

Reviewed by James Beckerman on September 05, 2016

NEXT QUESTION:

How can smoking affect your heart?

WAS THIS ANSWER HELPFUL

THIS TOOL DOES NOT PROVIDE MEDICAL ADVICE. It is intended for general informational purposes only and does not address individual circumstances. It is not a substitute for professional medical advice, diagnosis or treatment and should not be relied on to make decisions about your health. Never ignore professional medical advice in seeking treatment because of something you have read on the WebMD Site. If you think you may have a medical emergency, immediately call your doctor or dial 911.

    This tool does not provide medical advice. See additional information.